Location -> Products -> Water Treatment -> On-line Instrument -> Industry pH/ORP Meter
Type：CX-OT-1502 on-line turbidity meter
Illustrate：It can be widely used for the field on-line turbidity measurement in power plants, pure water plants, tap water plants, sewage treatment plants, beverage plants, environmental protection departments, industrial water, liquor industry, pharmaceutical industry, epidemic prevention departments, hospitals and other departments.
CX-OT-1502On-line Turbidity Meter
Brief Introduction
1.It is used for online measurement of the scattering level of the light generated by the insoluble particulate matters suspended in the non-transparent liquid
2.It can quantitatively characterize the content of the suspended particulate matters.
Main Features
1.It is featured by streamline appearance design, simple operation and high price-performance ratio
2.it adopt slow-drift and high-precision electrical circuit system, which can be equipped with the remote display extension.
3.It has reliable positioning structure and high-precision optical system, with fast response and accuratemeasurement
4.4-20mA signal output; the instrument can work stably for a long time.
5.It owns a wide scale range, stable and reliable; its calibration is simple; ABS plastic split wall-mounting type
makes installation and maintenance simple.
Main Parameters
| Measuring range | 0-10, 0-20, 0-100NTU |
| Incoming water pressure | 0.05~0.2MPa |
| Applicable temperature | 0~40 C |
| Output signal | 4 ~ 20mA |
| Features | Low-turbidity on-line measurement, good stability and maintenance-free |
| Accuracy | <FS (full scale) ± 5% |
| Reproducibility | <FS ± 1% |
| Resolution | 0.001NTU/0.01NTU/0.1NTU |
| Hourly drift | <0.1NTU |
| Sampling volume | 200ml continuous |
| Relative humidity | <70% RH |
| Supply voltage | 200~240V 50HZ |
| Power consumption | <25W |
Last：沒(méi)有了 Next：CX-SA-1603 silicate analyzer
