Location -> Products -> Test Instrument -> Ultrasonic Thickness Meter
Type：CX-UTM-342 ultrasonic thickness meter
Illustrate：It can measure the sound velocity according to the known thickness.
CX-UTM-342 Ultrasonic Thickness Meter
Main Features
1.Built-in high-speed thermal printer
2.Automatic calibrate zero point, can revise system error.
3.Data transmitter: RS232 interface, can connect with PC
4.Voltage tips, automatic power off function
5.The unit of measurement are metric or inch (optional)
6.It can setting the out of the tolerance alarm of the upper and lower limit
7.Two-point Calibration function, can improve accuracy.
Technical Parameters
| UTM-342 | |
| Measuring range | 0.75~300mm(steel, determined by probe) |
| Resolution | 0.01mm |
| Sound velocity range | 1000~9999m/s |
| Surface temperature | -10~60C |
| Accuracy | ±(1%H+0.1)mm,H: the actual thickness of the measured medium |
| Power supply | 6V Rechargeable NiMH battery |
| Operating time | About 200 hours |
| Outline dimension | 230×86×46mm |
| Weight | About 400g(main body) |
| Standard configuration | Main body, L51 probe, power supply adapter, couplant, Printing paper |
| Optional configuration | Probe, couplant |
Probe Parameters
| Name | Model |
Freq. (MHz) |
Probe Dia. | Measuring range | Min. Pipeline size | Description |
| Standard probe | L58 | 5 | 10mm | 0.8mm~200.0mm(in steel) | Φ20mm×3.0mm | Normal temp.(<60C) |
| L51 | 5 | 10mm | 1.0mm~250.0mm(in steel) | Φ20mm×3.0mm | Normal temp. (<60C) | |
| Mini. dia. probe | L77 | 7 | 6mm |
0.7mm~50.0mm (in steel) |
Φ15mm×2.0mm | For thin-wall and small cambered surface, normal temp.(<60C) |
| Coarse-grain probe | LZ2 | 2 | 22mm |
2.5mm~350mm (in steel) |
20 | For cast iron and other coarse grained material measurement normal temp. use (<60C) |
| High-temp. probe | Lg5 | 5 | 14mm |
2.0~100mm (in steel) |
30 | For high temperature material(less than 500C )measurement |
Last：Without the Next：CX-UTM-330/331/332 ultrasonic t..
